Grizzly ERV 1400-35 ZV Translation Of The Original Instructions For Use page 51

versing other surfaces than
grass.
• Never leave the implement un-
attended at the place of work.
• Always switch off the imple-
ment and disconnect the power
plug:-
- Whenever you leave the imple-
ment
- Before you clean the ejector
opening or unblock or unclog
the implement
- When the implement is not be-
ing used
- During all maintenance and
cleaning work
- When the power cable is dam-
aged or has become tangled
- When the implement hits an
obstruction during work or
when unusual vibrations arise.
Establish the cause and see if
the implement has been dam-
aged. Do not repair it yourself!
Have the implement repaired
by an authorised workshop!
• Store the implement in a dry
place well out of reach of chil-
dren.
CAUTION! The following
states how to avoid damage
to the implement and any
resulting harm to people:
Take care of your implement
• Switch off the power when
the implement is to be carried
across steps.
• Inspect the implement each
time before it is to be used.
Never operate the implement
if safety devices (e.g. impact
protector, parts of the cutting
facility or bolts are missing,
worn out or damaged. Check
especially the power cable and
starting lever for damage. To
avoid imbalance, all tools and
bolts must be exchanged as
complete sets.
• Only use spare parts and ac-
cessories that have been sup-
plied or recommended by the
manufacturer. The use of alien
parts results in the immediate
loss of all guarantee claims.
• Ensure that all nuts, bolts and
screws are firmly tightened and
that the implement is in a safe
working state.
• Never try to repair the imple-
ment yourself, other than you
have been trained accordingly.
All work that has not been list-
ed in these Instructions must
only be carried out by author-
ised servicing agencies.
• Treat the implement with the
greatest care. Always keep the
tool clean for better and safer
work. Follow the maintenance
instructions.
• Never overload the implement.
Always work within the specified
capacity range. Do not use low-
power machines for heavy-duty
work. Do not operate the imple-
ment for purposes for which it is
not intended.
Electrical safety:
CAUTION! The following
states how to avoid accidents
and injuries due to electric
shock:
GB
51