Figure 42. Placing the system into the operating position
4. For a rack-mounted system, push the system unit (B) as shown in the previous figure back into the rack
until both release latches lock the system into position.
Secure the cable management arm with hook-and-loop fasteners around the back side of the cable
management arm, but not around the cables.
5. Using your labels, reconnect the power cords (A) to the system unit.
Fasten the power cords (A) to the system using the hook-and-loop fasteners (B) as shown in Figure 43
on page 49 or Figure 44 on page 50.
48 Power Systems: NVMe M.2 carrier cards and flash modules for the 9009-41A, 9009-42A, or 9223-42H