Registering The Handset(S); Setting The Alarm Clock - BellSouth GH5860 Owner's Manual

5860 man.qxd 11/7/2003
Caller ID System Operation
K. Registering the HANDSET(S)
1. Press the
VOL
2. Press the
*
3. Press the
EDIT
prompt "Select base." The default setting is "Base 1"
(B1).
4. To confirm, press the
LCD Screen will display "Put down H/S". Put the
HANDSET on the BASE UNIT charge cradle within
6 seconds. A confirmation "beep" tone will be heard.
5. The BASE UNIT will automatically assign the ID
number of the newly registered HANDSET. The
"Handset #" will be displayed on the LCD Screen.
6. To register more HANDSETS, follow steps 1 to 4.
7. Continue with programming or press the
button to return to STANDBY mode.
NOTE:
To register the HANDSET(S) to another BASE UNIT, select the BASE 2 option by pressing
the SCROLL UP
connected to a separate telephone line.
L. Setting the ALARM CLOCK
1. Press the
VOL
2. Press the
#
3. Press the
EDIT
to
1
0
PM. The default ALARM CLOCK setting is "Off."
4. When the desired setting is displayed, press and hold the
the setting. A long "beep" will sound to confirm the setting has been saved.
5. Press the
VOL
NOTE:
To stop the alarm, press any TELEPHONE KEYPAD button. The ALARM setting is a one
time setting, therefore the alarm must be re-set before the alarm will sound again.
5:48 PM Page 36
/MENU button to enter the menu.
button to go to the REGISTER programming option.
/FLASH button. The LCD Screen will
/FLASH button again. The
EDIT
VOL
or DOWN button. The second BASE UNIT (B2) must be
/MENU button to enter the menu.
button to go to the ALARM CLOCK programming option.
/FLASH button. Set the time by pressing the TELEPHONE KEYPAD
buttons. Press the button to enter AM, or
1
/MENU button to return to STANDBY mode.
27
/MENU
2 button to enter
abc
/RE/PA button to save
SAVE
Multi-HANDS