5860 man.qxd
11/7/2003
Caller ID System Operation
I. Deleting Message Waiting Indication
1. Press the
/MENU button to enter the menu.
VOL
2. Press the
button to go to the MESSAGE WAITING programming option.
9
wxyz
3. Press the
/FLASH button to reset the Message Waiting Indication. "Off" will begin
EDIT
flashing.
4. Press and hold the
sound to confirm the setting has been saved.
5. Continue with programming or press the
mode.
J. Setting the Area Code
1. Press the
/MENU button to enter the menu.
VOL
2. Press the
button to go to the AREA CODE programming option.
0
3. Press the
/FLASH button. The entry will display a flashing prompt at the left side
EDIT
of the number field.
4. Press the TELEPHONE KEYPAD
code for your phone number.
5. When the desired setting is displayed, press and hold the
the setting. A long "beep" will sound to confirm the setting has been saved.
6. Continue with programming or press the
mode.
NOTE:
To use the call back function, press the
DIALING mode. Press the
7-digit number plus the area code. The LCD Screen will only display the last 7-DIGITS for
all 10-DIGIT INCOMING CALLS that matched the AREA CODE setting.
5:48 PM
Page 35
/RE/PA button to delete the indication. A long "beep" will
SAVE
/MENU button to return to STANDBY
VOL
to
1
0
/MENU button to return to STANDBY
VOL
/OPTION button and then select the 10-DIGIT
#
button and the unit will automatically dial the stored
TALK
26
buttons to enter the three digit area
/RE/PA button to save
SAVE