Changing The Battery Pack - BellSouth GH5860 Owner's Manual

Multi-handset, multi-base unit 5.8ghz digital spread spectrum technology cordless all digital answering system with caller id/call waiting 156 channel autohop
Table of Contents

Advertisement

5860 man.qxd
11/7/2003

Changing the BATTERY PACK

Changing the BATTERY PACK
The BATTERY PACK provides power for the HANDSET of your cordless telephone.
To Replace the BATTERY PACK:
1. Remove the HANDSET BATTERY COMPARTMENT COVER by sliding it down.
2. Pull out the BATTERY PACK PLUG and remove the BATTERY PACK.
3. Plug the new BATTERY PACK into the BATTERY CONNECTOR.
4. Slide the HANDSET BATTERY COMPARTMENT COVER firmly into place in its closed
position.
5. Before use, charge the new BATTERY PACK for 12 hours.
ATTENTION:
The telephone that you have purchased contains a rechargeable BATTERY PACK. The
BATTERY PACK is recyclable. At the end of its useful life, under various state and local laws,
it may be illegal to dispose of this BATTERY PACK into the municipal waste stream. Check
with your local solid waste officials for details in your area for recycling options or proper
disposal.
In order to get maximum life from the HANDSET
5:48 PM
Page 49
OLD
BATTERY
PACK
IMPORTANT
BATTERY PACK, be sure to charge the
HANDSET for 12 hours before initial use.
40
NEW
BATTERY
PACK
BATTERY
COMPARTMENT
COVER

Advertisement

Table of Contents
loading

Table of Contents