Table of Contents
Advertisement
9. GLOSSARY
DVI
(Digital Visual Interface)
A digital flat panel interface. DVI can transmit digital data from the PC directly
without loss with the signal transition method "TMDS".
There are two kinds of DVI connectors. One is DVI-D connector for digital signal
input only. The other is DVI-I connector for both digital and analog signal inputs.
DVI DMPM
(DVI Digital Monitor Power Management)
The Power management system for the digital interface. The "Monitor ON" status
(operation mode) and the "Active Off" status (power-saving mode) are indispensable
for the DVI-DMPM as the monitor's power mode.
LUT
(Look-up table)
Look-up table is the compensation data, to which the monitor refers, when the
monitor outputs the input data from a graphics board. In this model, the "Default*"
adjusted beforehand referring to look-up table at a factory or "Normal", which is in
the state of the characteristic of panel original, (i.e. not adjusted) can be available.
"Custom" automatically stores the customized data after the calibration is performed.
*"Default" is adjusted with the factory default brightness to DICOM grayscale
standard.
Resolution
The LCD panel consists of a fixed number of pixel elements which are illuminated to
form the screen image. The EIZO G31-G display panel consists of 1536 horizontal
pixels and 2048 vertical pixels, and the G51-BLG/G51-CLG consists of 2048
horizontal pixels and 2560 vertical pixels. At a resolution of 1536 × 2048 (G31-G) /
2048 × 2560 (G51-BLG/G51-CLG), all pixels are displayed as a full screen.
TMDS
(Transition Minimized Differential Signaling)
A signal transition method for the digital interface.
English
31
9. GLOSSARY
Advertisement
Table of Contents
