Troubleshooting Guide - Vinotemp VT-21TEDS-2Z Instruction Manual

PROBLEMS WITH YOUR WINE CELLAR
You can solve many common wine cellar problems easily, saving you the cost of a
possible service call. Try the suggestion below to see if you can solve the problem
before emailing Vinotemp at info@vinotemp.com
TROUBLESHOOTING GUIDE
PROBLEM POSSIBLE CAUSE
Wine cellar does not operate (D Not plugged in © Using wrong voltage
©The circuit breaker tripped © Blown fuse.
Wine cellar is not cold
enough
® Check the temperature control setting, external
environment may require a cooler setting.
©The door is open too often.
©The door is not closed completely.
©The door seal does not seal properly.
©The wine cellar does not have the correct clearance at
the back and two sides.
The light does not work Call the service center.
Vibrations
Check to see that the wine cellar is level.
The wine cellar seems to
make too much noise
©The wine cellar is not level.
©Check the fans inside the cabinet and at the back of the
unit
The door will not close
properly
©The wine cellar is not level.
©The doors were reversed and not properly installed.
©The seal is weak.
©The shelves are out of position.
Temperature LED does not
display
©Main control board does not work.
©Temperature controller problem.
©There is some problem with the plug(no power supply)
Temperature LED display
error
Temperature sensor is cut off.
Buttons are not functional Temperature controller panel is damaged.
9