Troubleshooting Guide - Vinotemp VT - DRAW2WBC Owner's Manual

2 drawer wine & beverage cooler
Table of Contents

Advertisement

You can solve many common cooler problems easily, saving you the cost
of a service call. Try the suggestions below to see if you can solve the
problem before contacting Vinotemp at info@vinotemp.com.
PROBLEM
Unit does not
operate
Unit is not cold
enough
The light does not
work.
Vibrations
Unit makes too
much noise.
The door will not
close properly.
LCD does not
display.
10

TROUBLESHOOTING GUIDE

Unit is not plugged in or you may be using a different
voltage.
The circuit breaker may be tripped or a fuse may be
blown.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door seal does not seal properly.
The unit does not have the correct clearance.
Check the light bulb.
Check to make sure the unit is level.
The unit is not level.
Check the fan.
The wine cooler is not level.
The doors were reversed and not properly installed.
The seal is weak.
The shelves are out of position.
Main control board does not work.
There is a problem with the PCB.
There is a problem with the plug.
W W W . V I N O T E M P . C O M
POSSIBLE CAUSE
1
0

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vt-draw2wcbVt-draw2wbc

Table of Contents