Samsung DV9 BB9 Series Manual page 129

Over a wash basin:
By using the drain pipe of the wash basin:
A
STEP 4 Power on
Plug the power cord into a wall socket protected by a fuse or circuit breaker. Then, tap
on the dryer.
B-PJT_DV9400B_SimpleUX_SG_DC68-04447L-00_EN.indd 17
1. Make sure to place the end of the accessory hose
lower than 90 cm (*) from the bottom of dryer.
2. To bend some point of the accessory hose, use
the supplied plastic hose guide (B) and secure the
guide to the wall with a hook or to the tap with a
piece of string. Assemble the drain hose (A) and
the hose guide (B) and fix them with the cable-tie
(C).
A
3. You can drain the condensed water by
connecting the accessory hose (long drain hose)
to the drain-outlet directly.
CAUTION
Do not extend the drain hose. Water may leak from
the connected area. Use a long drain hose.
B C
1. Assemble the hose connector (A), and attach it to
the end of the accessory hose as shown.
CAUTION
To prevent water leak, make sure to connect the
hose and the connector firmly.
2. Connect the hose adapter directly to the drain
pipe of the wash basin.
to turn
English
17
2023/6/14 15:45:27