Samsung DV9 BB9 Series Manual page 128

Heat pump dryer
Table of Contents

Advertisement

Available languages
  • EN

Available languages

STEP 3 Drain hose
A
A
English
16
B-PJT_DV9400B_SimpleUX_SG_DC68-04447L-00_EN.indd 16
As a factory default, this dryer is set to use the built-
in water tank to drain condensed water.
B
1. Remove the drain hose from hole (A), and insert
A
B
2. Insert one end of the accessory hose (long drain
3. Insert the other end (outlet) of the accessory
We strongly recommend connecting the drain
hose to your drainage system.
If the drain hose connected on the dryer is too
short to reach the drainage system, use the
provided accessory hose (long drain hose).
Use the built-in water tank only if you cannot
connect the drain hose to a drainage system.
NOTE
it into part (B).
hose) into hole (A).
hose to the drainage system in one of the
following ways:
2023/6/14 15:45:27

Advertisement

Table of Contents
loading

Table of Contents