Samsung DV9 BB9 Series Manual page 127

Step-by-step installation
STEP 1 Select a location
Location requirements:
Select a level, well-constructed surface that will withstand vibrations. Select a location where a
grounded, 3-prong outlet is easily accessible.
WARNING
• Install the dryer indoors only.
• Do not install the dryer in areas exposed to the weather.
• Do not install the dryer where the temperature may fall below 5 °C or rise above 35 °C.
• Do not install the dryer where gas may leak.
• Do not block the cooling grill's air inlet located at the dryer front.
STEP 2 Adjust the levelling feet
C
B-PJT_DV9400B_SimpleUX_SG_DC68-04447L-00_EN.indd 15
1. Gently slide the dryer into the desired location.
A
2. Use a level (A) and check the levelness of the
dryer from side to side and front to back.
3. If the dryer is not level, turn the levelling feet (B)
left or right to adjust the height.
4. Once the dryer is level, make sure the dryer
stands firmly on the floor.
5. Plug in the dryer.
B
NOTE
• To set the dryer to the same height as the
washing machine, turn the levelling feet to the
right until it fully retracts (C). Then, turn the
levelling feet to the left to extend (D) it until the
D
dryer and the washing machine are the same
height.
• Extend the levelling feet only as much as
necessary. Extending the levelling feet more than
necessary can cause the dryer to vibrate.
English
15
2023/6/14 15:45:27