Advertisement
Quick Links
Instruction Leaflet
Installation Instructions for Motor Operator for
3- and 4-Pole ND, NB, NC, MD, MA, MC Type
Circuit Breakers and Molded Case Switches
IL29C204I
E ective October 2011
Supersedes IL29C204H 9/11
Contents
Description
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . .
2. Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3. Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4. Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . .
Page
2
2
5
5
Advertisement
Related Manuals for Eaton EOP5T07
Summary of Contents for Eaton EOP5T07
- Page 1 E ective October 2011 Instruction Leaflet IL29C204I Supersedes IL29C204H 9/11 Installation Instructions for Motor Operator for 3- and 4-Pole ND, NB, NC, MD, MA, MC Type Circuit Breakers and Molded Case Switches Contents Description Page 1. Introduction ......2.
-
Page 2: Installation
The recommendations and information contained herein are based on Eaton experience and judgement, but should not be considered to be all-inclusive or covering every application or circumstance which may arise. If any ques- Fig. - Page 3 SECURELY MOUNTED TO A CIRCUIT BREAKER using two .500-in. pan head screws. BEFORE OPERATING ELECTRICALLY. Trip breaker to the "TRIP" 2-4. t i s motor operator to the circuit breaker with screws Fig. 2-1 Motor Operator Kit EATON CORPORATION www.eaton.com...
- Page 4 Remove the motor operator cover Loosen two in. pan head mounting screws 2-8. To connect the power and control wiring, refer to 3. Remove bottom mounting plate spacer Remove bottom terminal cover Fig. 2-2, page 3. Fig. Terminal Tightening Instructions 2-3. EATON CORPORATION www.eaton.com...
- Page 5 (white line) to the Manual Operation mode. In this breaker can be operated without the motor operator. mode electrical power to the motor is cut off Under standard conditions the factory settings (Figs. 3-1 and 3-3). should not require field adjustments. EATON CORPORATION www.eaton.com...
- Page 6 3- and 4-Pole ND, NB, NC, MD, MA, MC Type E ective October 2011 Circuit Breakers and Molded Case Switches Fig. 3-1. Motor Operator Features Fig. 3-3. Motor Operator in Manual Position Fig. 3-2. Motor Operator in Electrical Position Fig. Motor Operator in Lock-Off Position EATON CORPORATION www.eaton.com...
- Page 7 Move the switch down to decrease the car- travel. After adjusting, tighten the screws. riage travel. After adjusting, tighten the screws. 4-6. Replace the motor operator cover and cover screws. 4-7. Reconnect the motor operator to the supply volt- age, reset. EATON CORPORATION www.eaton.com...
- Page 8 Installation Instructions for Motor Operator for Instruction Leaflet IL29C204I 3- and 4-Pole ND, NB, NC, MD, MA, MC Type Circuit Breakers and Molded Case Switches Table 1-1. Available Motor Operator Ratings and Operating Conditions Catalog Number EOP5T07 EOP5T09 EOP5T11 EOP5T26 EOP5T22 EOP5T21...
- Page 9 Installation Instructions for Motor Operator for Instruction Leaflet IL29C204I 3- and 4-Pole ND, NB, NC, MD, MA, MC Type E ective Octoberr 2011 Circuit Breakers and Molded Case Switches EATON CORPORATION www.eaton.com...
- Page 10 Installation Instructions for Motor Operator for Instruction Leaflet IL29C204I 3- and 4-Pole ND, NB, NC, MD, MA, MC Type E ective October 2011 Circuit Breakers and Molded Case Switches Notes: EATON CORPORATION www.eaton.com...
- Page 11 Installation Instructions for Motor Operator for Instruction Leaflet IL29C204I 3- and 4-Pole ND, NB, NC, MD, MA, MC Type E ective Octoberr 2011 Circuit Breakers and Molded Case Switches Notes: EATON CORPORATION www.eaton.com...
- Page 12 THE INFORMA TION, RECOMMEND ATIONS, AND DESCRIPTIONS CONTAINED HEREIN. In no event will Eaton be responsible to the purchaser or user in contract, in tort (including negligence), strict liability or other wise for any special, indirect, incidental or consequential damage or loss...