Description Of The Device; Massage Function - Lanaform Shiatsu Massager Manual

• If you have been fitted with
a pacemaker, implants or
any other ancillary device,
have thrombosis, diabetes;
• For any pain of an un-
known cause.
This product is a non-professional massage de-
vice designed to relax tired muscles. Do not use
this device as a substitute for medical treatment.
It is intended only for home use and non-pro-
fessional use.
Presentation
Thank you for choosing LANAFORM's Shiatsu
Massager. The Shiatsu Massager is a massage
seat cover with 4 gel rotating massage heads
which simulate shiatsu massage perfectly.
The massaging effect is particularly effective in
relieving contracted muscles and toning tired
tissues. The device brings you beneficial relax-
ation that will make you forget daily stress. Mas-
sages complete both your wellness, sport and
fitness programme. The gel massage heads en-
sure a gentler, more natural massage than con-
ventional heads.

Description of the device

1 The device
01 Four massage heads
02 Fastening straps
03 Manual control
04 Protective bag
05 Seat cushion
06 Power cable
2 Remote control
01 ON/OFF button
02 Timer button (5-10-15 minutes)
03 Vibration button
04 Demo button
05 A+B button (whole back massage)
06 A button (upper back massage)
E-IM-ShiatsuMassager-Lot001.indd 6 E-IM-ShiatsuMassager-Lot001.indd 6
07 B button (lower back massage)
08 Heat button (heat))
Installing the Shi-
atsu Massager
01 Place the cushion upright on a suita-
ble seat with a base and back. Make
sure the seat is set up so that it is ful-
ly in contact with its base and at the
appropriate height for the back.
02 Use the fastening straps to
attach the shiatsu cushion.
03 Plug the device into the mains.

Massage function

01 Ensure that you are sitting comforta-
bly on the seat, with your back straight.
Make sure you are sitting in the mid-
dle, so that the massage heads can
move along both sides of your spine.
02 Switch on the massage device
by pressing key [1]. Select the
area to be massaged using the
A+B/A/B buttons [5/6/7].
03 The LED indicators display the
massage area selected.
04 You can activate the massage head
heating function and the lumbar area
by pressing the heat button [8].
05 The Shiatsu massage unit with its
rotating massage heads slowly
moves up from its starting position
on the lower back and moves up and
down the selected massage area.
06 When selecting the massage area, the
automatic off function is activated and
set to 15 minutes. The automatic off
function can be set to 5, 10 or 15 minutes
by pressing the timer button [2].
07 NB: the counter is reset after changing
the timer setting. To prevent the
device from overheating, select
the maximum massage duration
08/03/2021 10:05:16 08/03/2021 10:05:16