Mounting On The Wall - LaserLiner LaserCube Manual

3
Wall applications
Mount the device on the wall for horizontal and vertical levelling.
Then align the device with the vials.
4

Mounting on the wall

1. Place device on the wall.
2. Push the special pins through the appropriate holes.
Technical data
(Subject to technical changes without notice. 23W10)
Accuracy
Laser wavelength
Laser class
Power supply
Operating time
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight
EU and UK directives and disposal
This device complies with all necessary standards for the free
movement of goods within the EU and the UK.
This product, including accessories and packaging, is an electrical
appliance that must be recycled in an environmentally appropriate
manner in accordance with European and UK directives on waste
electrical and electronic equipment, batteries and packaging,
in order to recover valuable raw materials.
Further safety and supplementary notices at:
https://packd.li/ll/ACT/in
± 1 mm / m
635 nm
2 / < 1 mW (EN 60825-1:2014/AC:2017)
3 x alkaline batteries
(LR 44 / AG13 / V13GA)
4 hours (alkaline batteries)
0°C ... 40°C, max. humidity 80% rH,
no condensation, max. working altitude
4000 m above sea level
-10°C ... 70°C, max. humidity 80% rH
38 x 38 x 38 mm
36 g (incl. batteries)
LaserCube
EN
07