Assembly
1
Screwing the cam bolts
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This will make
the assembly easier.
□
Unpack the unit and confirm that you have all the hardware and required parts. Assemble the unit on a carpeted floor or the empty
carton to avoid any scratches.
□
Securely screw the cam bolts (FF) into the designated small holes on the side panels (R and U) using a Phillips screwdriver. DO NOT
overtighten the cam bolts.
2
Gluing the wood dowels
NOTE:
Refer to the dowel assembling guide drawings in this step for further clarification on how to properly glue in the wooden dowels. Apply
this method whenever instructed to install wood dowels
□
Glue the large wood dowels (CC) into the inner holes on the side panels (R and U) as shown.
CC
CC
R
.
R
CC
CC
FF
U
CC
CC
5
Please contact 1-800-986-3460 for further assistance.
U
HOMEDEPOT.COM/HOMEDECORATORS