Advertisement
Quick Links
Advertisement
Related Manuals for Mercia Garden Products SI-002-001-0007
Summary of Contents for Mercia Garden Products SI-002-001-0007
- Page 1 2mm Drill bit 12mm CSK...
- Page 2 50kg...
- Page 3 Model Build Instructions Required 5x5 Playhouse With Half Glazed Door, 02DTSHAX05051W-V1-PEFC (Playhouse) Tower & Slide 02DTTWR6565-V1-PEFC (Tower) SI-002-001-0007 5x5 Playhouse With Half Glazed Door, 02DTSHAX05051W-V1-PEFC (Playhouse) Tower, Slide & Swing 02DTTWR6565-V1-PEFC (Tower) SI-002-001-0008 02PATINCSWA-V1-PEFC (Swing Set) 5x5 Playhouse With Framed Door, Tower &...
- Page 4 Additional Items required for Slide: Before assembly please make sure you have a suitable base ready to erect your building Slide Framing - 75x75x555mm QTY 1 F7575-555mm MADE IN GREAT BRITAIN Front Saftey Board QTY 1 PI-03-0204 Overall Dimensions: Width = 1984mm Depth = 1923mm Height = 1625mm Slide QTY 1...
-
Page 5: Pre-Assembly
Pre Assembly Step 2 Parts Needed - & & Before assembling remove the transportation Pre drill hole Place a corner brace (No.7) up blocks from the bottom of each panel. against the platform (No.1) and the rear post (No.8) Ensure that Take care removing the blocks as to not damage the corner brace is sitting from the the panels. - Page 6 Step 6 Step 4 Part needed - & & Part needed - & & Pre drill Pre drill hole hole measurment taken Place the front post (No.9) next previously for the corner braces to the rear post (No.8) ensuring (No.7) and using a pencil mark out the end sits ush with the where the corner braces need to sit...
- Page 7 Step 8 Once you have nished constructing the Parts needed - & & playhouse you can now continue to Pre drill nish the tower. This particular hole measurment taken playhouse has been used for illustrative previously for the corner braces and purposes.
- Page 8 Step 10 Step 11 Parts needed - Parts needed - & & Pre drill Place the large rail (No.2) Pre drill hole To construct the ladder ensure you hole between the two front posts pre-drill holes using (No.9) ensuring the front of the 16x50mm screws attach each step 50kg rail nishes ush with the front...
- Page 9 Step 14 Step 13 Parts needed - Part Needed - Pre drill Pre drill hole hole If you have purchased the slide Place the ladder between the skip this step and go straight to front post (No.9) and 50kg 50kg step 14.
- Page 10 Step 15 Note if tting slide Parts needed - Pre drill hole Please keep this instruction sheet safe for future reference. This and all further steps are for when Inappropriate use or faulty application of the product is explicitly forbidden and absolves a slide has been purchased.
- Page 11 Step 16 Parts needed - Pre drill hole Position the slide (No.14) on top of the platform and the slide 50kg framing (No.13), ensure the slide is pushed right up to the slide frame and x to the platform with 2x40mm screws.
Need help?
Do you have a question about the SI-002-001-0007 and is the answer not in the manual?
Questions and answers