Camera Installation - ELPRO CZ40RIPS User Manual

2.4. Overview camera
1. MICROPHONE
2. CAMERA LENS
3. INFRARED LEDS
Turn red when the Night Vision Sensor (see 5) has detected darkness.
4. DETECTION WARNING LIGHT
Flashes red
5. NIGHT VISION SENSOR
Records whether there is sufficient darkness to switch to night vision.
6. PIR-SENSOR
Registers whether there is movement through heat displacement.
7. RAIN COVER
8. SPEAKER
9. ANTENNA
10. MOUNTING BRACKET
11. ADAPTER PORT
12. PAIR/COUPLING
Button is used to pair camera with monitor (see 5.2.1 Camera setup - Pairing).

3. Camera installation

Important!
•
Before starting mounting, check performance by viewing the image on the monitor viewing
from the same location/position where the camera will be mounted.
•
The location should be free of dust and not in view of a strong light source or direct
sunlight.
•
Avoid thick walls, steel structures, double glazing or other obstacles between the camera
and the monitor.
•
This camera has built-in IR LEDs that allow images to be viewed in no/low light conditions.
Images will then be shown in black and white.
when motion is detected.
- 7 -