ELPRO CZ40RIPS User Manual page 13

Camera security set
Table of Contents

Advertisement

Available languages

Available languages

5.2.6 Camera setup – Anti-flicker
Set the camera's power frequency (50Hz or 60Hz) to prevent flickering.
5.3.1 Recording setup - Duration
You can set how long the camera keeps recording after motion detection triggers the
recording. The options are 15 seconds, 30 seconds or 1 minute.
Tap the icon and make a selection. (Default = 15 seconds)
When the camera records continuously, the recordings will be cut into files that have a
duration of 10 minutes. This cannot be adjusted.
5.3.2 Recording setup - Scheduled Recording / Continuous Recording
Here you can set a complete weekly schedule when each camera should start
recording. You can set several cameras at the same time and the recording times can
overlap. It is also possible to set within the recording schedule to record only when
motion is detected. To do so, tap the ''Motion'' button.
In the Scheduled recordings overview screen, you can see which days of the week and
at which times recordings have been scheduled. To actually schedule and delete
recordings, tap at the bottom right of the screen
Multiple cameras can be selected simultaneously and you can also choose to have
scheduled recordings start only after movement.
The total recording time is limited to the available space on the SD card. If the SD card
is set to overwrite the oldest files when it is full, the system continues recording;
otherwise, recording stops until space is available.
Scheduled recordings are divided into 10-minute file sizes. For example, if you record a
25-minute event, you will have two 10-minute recordings plus a 5-minute recording.
If the camera set is to record continuously, it is necessary to create a recording
schedule.
5.3.3 Recording setup - File overwrite
This feature lets you set the system to automatically overwrite the oldest files once the
SD card is full. This allows you to continue recording. If you do not allow overwriting,
recording stops when the SD card is full. The monitor will show that the SD card is full.
(See 2.2. Overview symbols, 3 SD card)
- 12 -
.

Advertisement

Table of Contents
loading

Related Products for ELPRO CZ40RIPS

Table of Contents