ELPRO CZ40RIPS User Manual page 14

5.3.4 Recording setup - Audio On / Off
For each camera, specify whether audio should be included when recording video.
When audio is disabled, no sound is available when viewing the recording.
5.3.5 Recording setup - Motion Recording On / Off
For each camera, specify whether to record when the camera detects motion. If you
disable it, the camera will not record. This is the default setting for the camera set. If
the camera set is to record continuously, it is necessary to create a recording schedule
(see 5.3.2 Recording setup - Scheduled recording).
5.4.1 System settings – Time Setup
Set the current date and time here. The system must be connected to your network via
Ethernet cable to synchronize with the internet time server. With the Daylight Saving
Time option, you can specify whether the system should take into account winter time
and summer time.
5.4.2 System settings - Network setup
Continue setting the monitor's network here.
5.4.2.1 Network setup – Wireless Transmitting
Specify which wireless protocol to use. By default, this is set to auto. This makes the
monitor automatically search for the best and most stable channel (CH1-11).
Maintenance is used for service purposes.
5.4.2.2 Network setup - Advanced setup
Here you can choose DHCP Dynamic Host Configuration Protocol or STATIC (fixed) IP
address. DCHP is the most common connection. The router automatically assigns an IP
address to the system. Static IP is for those who have the ability to specify an IP address
for their system.
5.4.2.3 Network setup - Reset password
This function resets the system to the default password "000000". A new password can
only be set via the app.
- 13 -