ELPRO CZ40RIPS User Manual page 15

5.4.2.4 Network setup - Information
Here you will find all network information, nothing can be changed or set.
5.4.3 System settings - Language
Set the language here.
5.4.4 System settings – Default Settings
Reset the complete set to factory defaults. This resets stored data, settings and
schedules to their default values. To reset the password, see 5.4.2.3 Network setup -
Reset password.
5.4.5 System settings - Format Memory Card
Format the memory card. This will completely empty the memory card and delete all
files.
5.4.6 System settings - Firmware Upgrade
You can upgrade to the most up-to-date firmware via this route. When the update
symbol (see 2.2 Overview symbols, 7 Update Available) is visible, it means that a new
firmware update is available. Choose to upgrade via an SD card or via the server.
5.5.1 Motion Detection Settings - Sensitivity
Here you can set the sensitivity of Video Motion Detection or PIR Detection for each
camera. First select the combined or individual desire and then set the sensitivity. You
can choose from High - Medium - Low - Off.
Video Motion Detection (VMD): Motion detection through pixel change
PIR Detection (HMD): Motion detection through heat displacement
5.5.2 Motion Detection Settings - Mask Area
It is possible to exclude certain areas in the screen from detection. The VMD will not
detect and register a selected area, so that, for example, bushes and/or trees cannot
cause detection.
- 14 -