Advanced Elements STRAITEDGE ANGLER PRO Owner's Manual page 17

PROBLEM
The tube is kinked
or bent in:
The kayak is not self
bailing:
There is water in the
kayak:
The kayak drifts to one
side:
The kayak does not track
well:
StraitEdge
SOLUTION
The tube just needs to be adjusted. When kayak is fully deflated try
adjusting the position of the tube inside of the outer shell. Then
reinflate.
There are four port holes under each side of the kayak. The port holes
have caps so it can be used as a self-bailing or a dry kayak. Make sure
the caps are off.
There will almost always be a little water in the kayak. One reason
is the water drips off of the paddle and into the kayak. The kayak is
a self-bailing kayak. There are four port holes under each side of the
kayak. The port holes have caps so it can be used as a self-bailing or a
dry kayak. Make sure the caps are on.
A kayak will always head in the direction of your last stroke. Make
sure to check that the air bags in the bow and stern are properly
inflated and that the straps are pulled tight. If the floor bladders is not
completely inflated, this will also cause the kayak to drift.
Try moving your seat forward a little more. This will allow for better
weight distribution and better tracking.
Angler PRO Inflatable Kayak Owner's Manual
TM
17