System Outline; Name Of Parts; Password Configuration - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

SYSTEM OUTLINE


1

Name of parts

Displays the screens
required to monitor and
control operation. The
touch panels on the
screen are manipulated
using a touch pen.
USB memory connec-
tion terminal (side of
case)
Note
*1
Touch panel screen operation precaution: Operate the touch panel screen so that it is touched and re-
leased perpendicularly with the accessory touch pen (or your fi nger). If it is released obliquely, it may
not work properly.
Notes
*2
• Some USB memories may not be recognized by the touch panel controller. When not recognized,
press the reset button after disconnecting the USB memory from the touch panel controller.
• Use a USB memory without "Write prohibited switch".
• Use FAT16 or FAT32 as the USB memory format.
2 Password confi guration
The kinds and relationship of passwords which can be set at this controller are as follows:
P.W.1
P.W.3
En-4
TOUCH PANEL CONTROLLER (UTY-DTGZ1)
Touch pen
Used to make manipu-
lation of the touch panel
Color LCD with
positive.
*1
touch panel
Reset button
*2
USB port
Front cover
Monitor Mode
User Setting
/ History
Installer Setting
Touch pen tray
Storage location when
touch pen not used.
Rear cover
Shows that the touch
panel controller is
energized.
Operation Setting
P.W.2
P.W.1
Schedule Setting
Group Setting
P.W.1
P.W.1 Low Noise Operation
P.W.1 : User Setting / History Password ...... Refer to 3-5-2.
P.W.2 : Operation Setting Password ........... Refer to 3-5-4.
P.W.3 : Installer Setting Password ............... Refer to 3-6-19.
Power indicator