Resetting "Filter Sign; Test Operation; Checking "Special State" Of R.c.groups / Groups - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

2-1-12

Resetting "Filter Sign"

Optional Setting
2-1-13

Test operation

Optional Setting
2-1-14

Checking "Special State" of R.C.Groups / Groups

Optional Setting
En-16
Note
Anti Freeze is a function that performs low temperature
heating operation to prevent freezing of water lines and
equipment, when air conditioning operation is off, in re-
gions where outside temperature may drop below freez-
ing.
If water lines are far from the unit or within exterior walls,
this function may not provide enough anti freeze protec-
tion.
Click "Reset" button
a
Note
1
When the function does not exist at the objective unit, set-
ting cannot be selected.
Note
"Filter Sign" indicates the air clean filter cleaning interval
set at the indoor unit.
Reset the sign when the filter was cleaned.
Click "Start" button.
a
Note
Test operation of the indoor unit selected at "Operation
Setting" screen starts.
1
Notes
There are the following 2 methods of resetting test op-
eration.
Automatic reset when 60 minutes has elapsed.
Reset when operation stop was performed.
The current special state of the system is displayed at
a
"Special State" display section of "Optional Setting"
screen.
1