Fujitsu UTZ-KXRA Installation Manual

AIR CONDITIONER
OPTIONAL PARTS
Insulation kit for high humidity
INSTALLATION MANUAL
For authorized service personnel only.
UTZ-KXRA
Note: Before installation, please check the shape of the main product as shown in this manual, so that appropriate parts
and accessories are used.
When installing the Insulation kit for high humidity, please read this manual thoroughly.
Before installation, be sure that all sources of power have been shut off. There is a danger of electric shock.
When installing the Insulation kit for high humidity, please refer to the operating manual and installation manual sup-
plied with the indoor unit.
Parts and accessories
The following installation parts are furnished. Use them as required.
When applying to indoor units shorter than the insulation parts, cut the shaded portion of Ins cabinet A to E as follows.
Name and Shape Q'ty Name and Shape
Installation manual Ins cabinet A
(This manual)
1
Installation manual Ins cabinet B
1*
Ins cabinet A Ins cabinet C
Hole
1
Slit
Slit
Ins cabinet B Ins cabinet D
Hole
1
Slit
Ins cabinet C Ins cabinet E
Hole
1
Slit
Slit
Ins cabinet D Ins top plate A
Hole
1
Slit
* Not used with this model. (Parts for this model are marked with white letters.)
PART No. 9379022071-03
WARNING
Q'ty Name and Shape
Ins top plate B
Slit
1*
(33-3/4 in.)
858mm
Ins top plate C
1*
Slit
Ins hook
1*
Slit
Ins hook
Slit
1*
Insulation panel B
or
4
(15-1/4 in.)
388mm
1
1
Attach the Ins cabinet C onto the outside of the indoor unit.
2
Align the slits of Ins cabinet A, B, C and D to the related hooks, and then attach onto the outside of the indoor unit.
Q'ty
4 Places
2
Ins cabinet B
1
4
3
Attach the Ins cabinet E onto the outside of the
indoor unit.
At this time, make sure that there is no gap among
4*
the surrounding heat insulator.
2*
Note:
When using the Distribution duct connecting port and Fresh
air inlet, please cut the insulation to fi t the duct used (locally
purchased).
Ins cabinet C
Ins cabinet A
Slit
Ins cabinet C
4
Attach the Ins top plate A, B, and C without any gap.
Ins top plate A
Ins top plate B×2
Ins top plate C
Ins cabinet E × 4
Ins cabinet D