Installer Setting; Setting The Address Of The Touch Panel Controller Main Unit - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

Installer Setting (Function Setting/R.C. Prohibition Setting)
3-6-2

Installer setting

Installer Setting Password Verifi cation
3-6-3

Setting the address of the touch panel controller main unit

Installer Setting

Installer Setting (Touch Panel Controller Address Setting)
● A password is set to prevent inadvertent opera-
tion.
1
Enter the password at "Installer Setting Password".
a
Note
"VRFVRF" is set as the default password.
Click "OK" button.
b
2
"Installer Setting" screen opens.

Note
If the password is changed, see par. "3-6-19".
Click "Change" button on "Touch panel controller ad-
a
dress setting".
1
"Touch Panel Controller Address Setting" screen

opens.
Notice
When 2 or more controllers* are installed in the system,
set the address numbers so that the controller addresses
(numbers) are not duplicated.
*Touch Panel Controller, Network Convertor(Group Remote Controller).
Select "Address" from 00 to 15 on the screen and click
b
the button.
At the end of setting, click "OK" button.
c
"Installer Setting" screen opens.

2
3
"Used" button
"Not Used" button
"OK" button
"Cancel" button
En-27