Registering Indoor Units In Operation Order - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

Notes
System abnormality
Abnormality contents
No outdoor unit
No indoor unit
There is an abnormality in communications.
There is an abnormality in unit setting.
There is an abnormality in RCG address.
No master unit at outdoor units.
Initializing
Specifi ed indoor unit does not exist.
No electricity meter found.
Failed acquiring data. Perform registration
again.
3-6-7

Registering indoor units in operation order

Installer Setting (Unit Registration)
Installer Setting (Unit Registration)
Register by operation order
Scanning
En-30
No outdoor unit of the same refrigerant system address as indoor unit.
Not even 1 indoor unit at the same refrigerant system address as outdoor unit.
Cannot communicate. There is not even 1 unit.
There is an abnormality in unit data setting.
There is an abnormality in RCG address setting.
There is no master unit at the outdoor units.
Cannot be executed because initializing at other unit.
There is no specifi ed indoor unit data.
Threre is no specifi ed number of electricity meter.
Information is not acuired properly.
Click "Select" button.
a
"Unit Registration" list screen opens.

1
Click "Indoor Unit" button.
b
Select the list of the remote controller group No. from
c
which registration is to begin.
When starting new registration, select No. 001.
Notes
2
When changing the indoor unit registration configuration
already registered, select the indoor unit you want to
4
change.
The selected indoor unit and indoor units registered after
it are deleted.
3
Click "Registration Start" button.
d
"Register by operation order" screen opens.

Click "OK" button.
e
"Performing system check" screen opens.

● At the orderly end of system confirmation, open "Indoor
Unit Registration" list screen (operation wait state).
5
Notice
When there is an abnormality in the system, an error
screen is displayed and registration is stopped.
See the items of 3-6-6.
● Operation of the indoor unit begins (On) in the
order you want to register.
"Indoor Unit Registration" List screen opens

Cause