Setting Automatic System Clock Adjustment - Fujitsu AIRSTAGE UTY-DTGYZ1 Operating Manual

Summer Time Setting (Schedule)
Summer Time Setting
3-2-6

Setting Automatic System Clock Adjustment.

Date and Time Setting
Date and Time Setting (Automatic System Clock Adjustment)
"Schedule" screen opens.

Set "Month", "Day of week", and "Time" in "Start" using
e
"" button or "" button.
Set "Month", "Day of week", and "Time" in "End" using
f
5
"" button or "" button.
When the setting is complete, click "OK" button.
g
6
Schedule" screen closes.

7
"Standard Time" and "Summer Time " are switched

automatically according to the set schedule.
When the setting is complete, click "OK" button.
h
8
● Setting which adjusts the time display of the
equipment inside the system
Click "Edit" button on "Automatic System Clock Adjust-
a
ment".
"Automatic System Clock Adjustment" screen opens.

Click the appropriate button from among "Disable",
b
1
"Master" and "Slave" buttons.
Notes
Disable: Automatic clock adjustment function is not per-
formed.
Unaffected by the master clock setting.
Master: Master unit automatic clock adjustment setting
Sets the clock of other units to match the mas-
ter unit clock.
2
Slave: Corrected to match the master unit clock by
automatic clock adjustment.
"Master" is setting of 1 unit in the system.
3
*"Master" is a unit in the system and becomes setting of 1 unit.
4
"Date of Week" and "Time" set by the automatic sys-
c
tem clock adjustment are displayed.
When Master was set, perform the setting shown be-

low.
Set "Date of Week" and "Time" which perform the au-
d
tomatic system clock adjustment using the "" and ""
buttons.
En-23