Product And Component Identification; Machine; Engine - jcb 4CX Pilingmaster Operator's Manual

Product and Component Identification

Machine

Your machine has an identification plate. The serial numbers of the machine and its major components are
marked on the plate.
The serial number of each major unit is also shown on the unit itself. If a major unit is replaced by a new one,
the serial number on the identification plate will be wrong. Either get a replacement identification plate from
your JCB dealer or simply remove the old number. This will prevent the wrong unit number being quoted when
replacement parts are ordered.
The machine model and build specification are indicated by the PIN (Product Identification Number). The PIN
has 17 digits and must be read from left to right.
JCB
Digit
1 to 3
4 to 8
9
10 to 17

Engine

Engine data labels are located on the cylinder block and rocker cover (if fitted). The data label contains important
engine information and includes the engine identification number. Injector codes are on a label on the rocker
cover.
12
Figure 7.
Table 1. Typical PIN
3CXPC
Table 2. Explanation of the PIN
9831/3050-3
Product and Component Identification
C
Description
World manufacturer identification. For example, JCB
= UK Build.
Machine type and model.
Randomly Generated Check Letter. The check letter
is used to verify the authenticity of a machine's PIN.
Machine serial number. Each machine has a unique
serial number.
About the Product
12345678
12