Description; General; Intended Use; Log Moving/Object Handling - jcb 4CX Pilingmaster Operator's Manual

About the Product

Description

Description

General

The PileMaster is a derivative of a Backhoe loader. It is a self-propelled wheeled machine with a main frame
designed to carry both front mounted equipment and rear mounted backhoe equipment with stabilisers.

Intended Use

The machine is intended to be used in normal conditions for the applications and in the environmental conditions
as described in this manual. When used normally in the loader mode (shovel use), the machine loads through
forward motion. A loader work cycle normally comprises filling, elevating, transporting and discharge of material.
When used in the backhoe (piling) mode, the machine is stationary and normally drills below ground level.
A backhoe (piling) work cycle normally comprises drilling, elevating, swinging and discharging.
Applications include earthmoving, road construction, building and construction, landscaping and similar
applications.
The machine is not intended for use in mining and quarrying applications (other than for light yard clearing
operations), in demolition activities, forestry, any use underground, or in any kind of explosive atmosphere.
A backhoe loader can also be used for object or material handling/transportation if it is suitably equipped with
relevant parts, systems and attachments. Refer to: Lifting and Loading (Page 134).
If the machine is to be used in applications where there is a high silica concentration, risk due to materials
containing asbestos or similar hazards, additional protective measures such as the use of PPE (Personal
Protective Equipment) may be required.
The machine should not be operated by any person who does not have an appropriate level of qualification,
training or experience of use of this type of machine.
Prior to use of the machine, its suitability (size, performance, specification etc.) should be considered with
regards to the intended application and any relevant hazards that may exist. Contact your JCB dealer for
support in determining the appropriate JCB machine, attachment and any optional equipment that is suitable
for the application and environment.

Log Moving/Object Handling

Do not use the machine to move or handle logs unless sufficient log protection is installed. You could cause
serious injury to yourself and damage to the machine. For more information, contact your JCB dealer.

Optional Equipment and Attachments

A wide range of optional attachments are available to increase the versatility of your machine. Only the JCB
approved attachments are recommended for use with your machine. Contact your JCB dealer for the full list
of approved attachments available.

Danger Zone

The danger zone is any zone within and/or around the machinery in which a person is subject to a risk to their
health or safety. During operation of the machine, keep all persons out of the danger zone. Persons in the
danger zone could be injured.
Typical danger zone when machine is static and 1,000 mm flight auger is installed. Refer to Figure 4.
8 9831/3050-3 8