Table of Contents
Advertisement
CHAPTER 1 – SAFETY WARNINGS
Read the following safety information carefully before you install or operate the KOHLER PowerPro
ELXA Static Inverter (SI) equipment and keep this manual within easy access of the equipment for
future reference.
1.1 DESCRIPTION OF SYMBOLS USED IN THIS MANUAL
WARNING:
The warning symbol is used where there is danger of an electrical shock,
equipment damage or personal-injury.
CAUTION:
The caution symbol is used to highlight important information to avoid possible
equipment malfunction or damage.
1.2 GENERAL WARNINGS
WARNING:
Be aware that the output from this equipment can be energized when the unit is
not connected to a mains supply, even when the input AC power is disconnected
WARNING:
The PowerPro ELXA assembly and peripheral equipment must be installed and
commissioned by suitably qualified and trained personnel who are aware of the potential
shock hazards.
WARNING:
The PowerPro ELXA must be supplied by a grounded outlet. Do not operate the
unit without a ground source.
WARNING:
To reduce the risk of electric shock:
• Do not insert any object into ventilation holes or other openings
• Do not remove any equipment cover – the unit does not contain any user-serviceable
parts. Refer all servicing requirements to qualified service personnel.
• Always disconnect the PowerPro ELXA from the mains power supply before you install
a computer interface signal cable. Reconnect the power only after the signalling
interface connections have been made
WARNING:
To reduce the risk of fire:
• Install this equipment in a temperature and humidity controlled indoor area free of
conductive contaminants.
• If a fuse ruptures always replace it with a fuse of the same type and rating.
4
Advertisement
Table of Contents
