Unpacking Instructions - Kohler PowerWAVE EL 100XA User Manual

3.2.3 UNPACKING INSTRUCTIONS

WARNING: The cabinet, battery cabinet (optional) and battery packages are heavy and may tip during
unpacking unless the unpacking instructions are not followed closely.
If the shipment is received in good order then unpack the PowerPro ELXA cabinet as follows:
1. Remove the plastic sheeting and cardboard sleeve covering the cabinet.
2. Remove the anchor bolts securing the cabinet to the pallet then lift and remove the cabinet from the
pallet.
3. Retain the packaging materials for possible future shipment.
4. Examine the cabinet for any sign of damage and notify your supplier immediately if any damage is
found.
5. Remove any internal protective packaging.
6. When the cabinet is placed in its final location, install the 4kVA power modules and secure them in
place.
7. Install a blanking plate to the front of any shelves that have no power module fitted.
Batteries
CAUTION: The system batteries must ALWAYS be installed by the commissioning engineer.
The batteries are shipped in a separate package and should remain in their packing until required by the
KOHLER service engineer when the system is commissioned.
Battery life depends very much on the ambient temperature, and optimum battery life will be obtained if
the batteries are stored and operated at a temperature of 20°C.
WARNING: If the system is delivered without batteries, KOHLER will not accept responsibility for any
damage or equipment malfunctioning caused by the incorrect storage, installation or connection of
batteries carried out by third parties.
15