Audible Alarms; Test Switch - Kohler PowerWAVE EL 100XA User Manual

Table of Contents

2.3.3.2 AUDIBLE ALARMS

During a utility failure or fault operation, the EL-Inverter a emits beeping sound for warning. In

back-up mode, the alarm can be silenced by pushing the "MAIN CONTROL ON/OFF BUTTON"

button. However, the warning of low battery will still sound urging user that load will be lost.

If the EL-Inverter is in normal operation it is supplying the load by the incoming utility supply. In

the case of a failure in this supply, the output is connected to the static inverter output. This

transfer operation is performed internally by the control logic of the Inverter.

The operation of the EL-Inverter can be controlled externally; the unit can be forced to supply the

output by the Inverter and batteries. This can be achieved by turning the TEST button.

When the equipment is switched into the Test mode, the red "TEST ON" LED will

Note:

be lit.

The TEST Button or the external test loop can be used for testing the machine's operation

and performance; it can also be used to maintain the EL-Inverter's loads.

WARNING:

When the TEST button has been used, it is important that it is switched

off so the EL-Inverter can return to a standby operation and the batteries

are recharged.

Table of Contents