American Standard T061901.243 Manual page 5

5
HAND SHOWER INSTALLATION
• Drop SPRAY ESCUTCHEON (1) through the fourth hole of the tub ledge
(12" max from SPOUT center) with SPRAY ESCUTCHEON (1) directed
towards tub center. Be sure RUBBER RING (2) is properly seated in
ESCUTCHEON (1).
• Add SEAL WASHER (3) and connect HOSE (8) to outlet nipple at the
bottom of TEE (5). Tighten firmly.
• Slip SHOWER HOSE (6) with COUPLING NUT through SPRAY
HOLDER (4) and ESCUTCHEON (1). (Note: SPRAY HOLDER (4)
must be separate from ESCUTCHEON (1) to get HOSE (6) through
ESCUTCHEON (1). Install SEAL (7) before connecting both HOSES (6)
and (8). INSTALL second SEAL (9) and connect HAND SHOWER (9)
to SPRAY HOSE (6).
NOTE: When not in use, HAND SHOWER should be seated in
the HOLDER.
D
6
CARE INSTRUCTIONS
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL
CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS,
OR A CLOTH WITH A COARSE SURFACE.
5
3
8
9
7
1
6
7
4
2