American Standard Green Tea In-Wall Diverter Valves T010.430 Specification Sheet

ALL CONNECTIONS 1/2" NPT
71mm
(2-3/4)

GENERAL DESCRIPTION:

In-Wall Diverters: Rotational control alternates water flow
between two (R420) or three (R430) different shower outlets
(i.e. showerhead, handspray, body side spray or tub spout).
Forged brass valve body. Mixed water inlet and two (R420) or
three (R430) outlets are marked on back of valve body. 1/2"
NPT connections on mixed water inlet and two (R420) or three
(R430) outlets. Stamped brass escutcheon. Tub port with
increased water flow (see chart).
NOTE:
Cannot be used as a shut-off valve.
SUGGESTED SPECIFICATION
Two (three) way diverter shall feature a forged brass body with 1/2" NPT mixed water inlet and outlets. Fitting shall be
American Standard Model # T010.430.___ (Diverter Valve Trim) and R4_0. (Rough Valve Body).
© 2008 AS America Inc.
66mm MAX.
(2-5/8)
57mm HOLE SIZE
(2-1/4)
41mm MIN.
(1-5/8)
FINISHED
WALL
F77
IN-WALL DIVERTER VALVES
MODEL NUMBER:
TRIM KITS:
T010.430 Diverter Valve Trim
Valve Trim ONLY. L ESS Valve.
ROUGH VALVE BODIES:
R420 Two-Way In-Wall Diverter Valve Rough
1/2" NPT inlets/outlets. Less Handle.
R430 Three-Way In-Wall Diverter Valve Rough
1/2" NPT inlets/outlets. Less Handle.
NOTE:
Cannot be used as a shut-off valve.
FINISHED
WALL

PRODUCT FEATURES:

Solid Brass Construction:
prolonged contact with water.
Removable Plaster Guard:
installation prior to installing trim parts.
Choice of Finishes:
Wide range of durable finishes.
GREEN TEA™
70mm
( )
2-5/8
Durable, ideal material for
Permits checking of valve