Crown Pagoda2 6x6m Instruction Manual page 12

Taking the tent down
1. Loosen all ratchets.
2. Remove stakes from the feet. If you find this tedious consider the UHD 3 Way stake puller.
3. Remove the rope ratchets down the legs.
4. Remove 2 legs from one side of the tent and carefully set the tent frame on the ground.
5. Remove the center mast assemblies
6. Remove opposite side legs.
7. Unfasten the corner straps, completely disconnecting the tent top from the frame and stakes.
8. Remove the 50mm external ratchets.
9. Roll out a drop cloth next to the frame.
10. Carefully remove the tent top from the frame, lifting up on the fabric or "flapping" it to create a cushion of air.
11. Fold and roll the tent top as tight as possible. Remember not to stand or walk on the tent top fabric.
12. Use the included protective shipping bags or contact us for larger bags
13. Disassemble all cables and fittings. Work from the perimeter of the frame inwards.
14. Fold and roll up the drop cloth.
15. Remove remaining stakes.
IF YOU NEED TO PUT THE MARQUEE AWAY WET, ENSURE IT IS DRIED AT THE EARLIEST POINT
POSSIBLE. THE LONGER IT IS LEFT DAMP OR WET THE MORE DAMAGE THAT CAN BE CAUSED BY
MOULD AND MILDEW
Pagoda
INSTALLATION INSTRUCTIONS
www.crowncanopies.co.uk PG.12