Crown Pagoda2 6x6m Instruction Manual page 11

Walls Setup Instructions (This step in optional)
The sidewalls are designed to hang around the outside of the legs with the ratchet assembly on the exterior of
the sidewalls.
a. Hang each sidewall by buckling the straps on the top of the side wall around the eave pole that
runs around the perimeter of the tent. Each sidewall will cover the distance between two legs.
Loosen the tent top tension if it is difficult to get the straps around the eave pole.
b. Tighten the hanging straps so the sidewall is hanging at the appropriate height or fit with the g ound
surface the tent is sitting on. Tuck the ends of each sidewall between the ratchet assembly and the
tent leg. Make sure the sidewall is centered between the two legs.
Hang the walls as high as possible if using the XG ground bars
Pagoda
INSTALLATION INSTRUCTIONS
www.crowncanopies.co.uk PG.11