Z3 Technology Z3-DM8168-PCI-RPS User Instructions page 55

Audio Enable
Audio Info (Entries for each of the 4 subchannels within the source)
Enable
Codec
Sample Rate
Bit Rate
Mode
Source
Pid
(UDP/TS Only)
Max PTS-PCR
(UDP/TS Only)
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
CONFIDENTIAL
True, False
yes (for Sub Channel 1)
no
DSP AACLC
DSP AACHE V1
DSP AACHE V2
ARM AACLC
ARM AACLC MPEG2
ARM AACHE
ARM AACHE V2
48000 Hz
44100 Hz
32000 Hz
16000 Hz
12Kbps – 384Kbps
(128Kbps)
Mono
Stereo
HDMI1
Analog
None
0 – 8191
(120,121,122,123)
0 – 500 (250)
th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
True -> Encode audio.
Used to select which subchannel should be used for
the audio source. Only one subchannel can be
enabled.
The codec to use for audio.
The sample rate of the audio.
The bit rate of the audio.
Select between stereo and mono inputs.
Where to get audio for that subchannel.
If UDP format is selected, the PID to use for that
audio channel.
Allows user to specify a smaller interval than 250ms
between PTS and PCR. This is for systems that
require tighter PTS-PCR intervals. It is generally
recommended to leave this value at 250. Certain
decoders may require a value of Max PTS-PCR
similar to the video delay. If an issue is
encountered with a specific decoder, please try
setting this value to the same value as video delay.
55
DOC-USR-0057-02