Running The Decoder; Create A .Ts File Using The Encoder; Connect The Output; Figure 32 Connecting The Z3-Dm8168-Pci-Rps For Decode - Z3 Technology Z3-DM8168-PCI-RPS User Instructions

8.0

RUNNING THE DECODER

The Z3-DM8168-PCI-RPS also supports decoding of streams. To see an example of this follow the steps
below.

Create a .ts File using the Encoder

(1) Follow steps (1) through (13) in Section 7.0 to stream a TS stream.
(2) Follow the instructions in Section 7.13 to save the stream to a TS file. Call the file
"encode_run1.ts".

Connect the Output

(3) Connect an HDMI cable to HDMI out of the Z3-DM8168-PCI-RPS:

Figure 32 Connecting the Z3-DM8168-PCI-RPS for Decode

(4) Connect the other end of the HDMI cable to an HD Monitor.
___________________________________________________________________________________________
Z3 Technology, LLC ♦ 100 N 8
CONFIDENTIAL
HDMI Out
th ST, STE 250 ♦ Lincoln, NE 68508-1369 USA ♦ +1.402.323.0702
37
DOC-USR-0057-02