Important Instructions - Kettler ALPHA RUN 200 Assembly Instructions Manual

EN IMPORTANT INFORMATION
EN
Important! Please read these instructions carefully before installation
and first use. You will receive important information for your safety as
well as for the use and maintenance of the appliance. Keep these instructions
somewhere safe for information purposes or for maintenance work or
ordering replacement parts. Pass these instructions on with the appliance if
the owner of the appliance changes.
This symbol ⚠ indicates an important warning.
These instructions can also be downloaded at
1.0 USER INFORMATION
• Caution! Please ensure you observe the instructions in the booklets "Safety
Instructions and Instructions for Initial Operation and Maintenance"
„Computer/training instructions, handling, biomechanics"
• This symbol
• This symbol
• This symbol
• This sport appliance corresponds to DIN EN ISO 20957-1:2014, and ...
• DIN EN ISO 20957-6:2017, Accuracy HB
• 2.0 ELECTRICAL SAFETY
⚠
W ARNING! Danger due to electric current!
Electric power is always a potential source of danger. Always use the ap-
pliance with the necessary caution.
⚠
D o not expose the appliance to moisture! Protect it from contact with liquids
• The properly installed electrical socket to connect the appliance must be
easily accessible.
• Before connecting the plug of the mains adapter/device with the socket,
the mains adapter/appliance voltage must be compared to the local volt-
age. If the values do not match, please contact our service team.
• After switching the appliance off, remove the plug from the power supply
again.
• Be very careful in ensuring that the cable does not become trapped or a
"tripping hazard".
• Connect the cable with a grounded safety socket. Do not connect via multi-
ple socket strips! When using an extension cable, this must comply with the
VDE guidelines.
⚠
D o not use damaged cables again and exchange them immediately. If the
mains line is damaged, this must be replaced by the manufacturer, a mem-
ber of the service team or another qualified specialist to avoid danger.
• This symbol
6
indicates an Allen key.
indicates a torque wrench.
indicates a screwdriver.
indicates that the appliance is protection class I.
www.kettlersport.com.
3
3 .
1
3 and