Preparation For Firstuse; Charging The Battery; Lnstalling The Generator - Testifire XTR2 User Manual

3
PREPARATION FOR
FIRSTUSE
Prior to flrst use:
The battery is charged by fitting the battery pack into the
charge cradle and connecting to a mains socket using the
supplied power adaptar (Fig. 1)

3. 1 Charging the Battery

• Ensure the battery is fully charged befare use.
• Do not charge the battery outside of the specified
operating temperature range (41-113
• At low ambient temperatures (41-50
may not charge completely but may continue to indi­
cate that charging is in progress.
• lf the battery pack detects that the temperature is
outside of the operational temperature range far
charging, a fault will be indicated by a red flashing LED.
• In the event of a battery charging fault, remove the
battery from the charging cradle, ensure the battery is
within the operational temperature range and retry
charging the battery.
Figure 1
&
WARNING
Read cautions on lithium Ion rechargeable
batteries befare use (see page 2)
8 Testifire XTR2

3. 2 lnstalling the Generator

• Open the back cover
• Remove protective packaging of generator. Do not
• lnsert generator firmly into recess, engaging clips 1 and
• Once the generator is inserted, do not remove it until
• When replacing a generator, any dust or debris within
º
F).
º
F), the battery
• Empty generators may be returned to the manufacturer
Figure2
touch exposed electrical contacts.
2 (see Fig.2)
indicated that a replacement is necessary.
the Testifire XTR2 housing can be removed using an air
duster. Any condensation can be removed by wiping
with a lint-free cloth.
via the reseller far environmentally friendly disposal
to comply with WEEE (Waste Electrical & Electronic
Equipment) Regulations.
1
1
1
1
o