Related Manuals for Testifire 25
Summary of Contents for Testifire 25
-
Page 1: Quick Start Guide
® M U L T I - S T I M U L U S D E T E C T O R T E S T E R Quick Start Guide SIGNALING Multi-Detector Test Apparatus as to Verification... -
Page 2: Preparation For Use
Removal: Release the upper access cover Only replace the CO capsule when ( ) on the body of the Testifire by it is empty. Turn Testifire off for five opening it from the right hand side. minutes to allow the capsule to cool... -
Page 3: Using The Menus
® M U L T I - S T I M U L U S D E T E C T O R T E S T E R 5. Using the Menus 6. Turning the Unit On Using the ‘UP’ and ‘DOWN’ menu... -
Page 4: Testing A Detector
M U L T I - S T I M U L U S D E T E C T O R T E S T E R Testing a Detector 1. How to Perform a Test To carry out a simple, single stimuli As the detector enters Testifire, the infrared beam test, use the UP and DOWN keys ‘ ’... -
Page 5: Indicating Led Reference Chart
(slow red flashing in ‘STANDBY’ mode Smoke CO Test in progress or fast red flashing in operation) Heat Menu Status Battery needs charging - Testifire still operational Red/Blue/Green Alternating Red/Green Alternating Flashing Smoke 1 Heat 1 Smoke, Heat and CO CO 1 ‘TIME OUT’... -
Page 6: Identification Of Parts
. Battery Baton Infrared Remote Control . Infrared Remote Control Receivers Generation of test stimuli starts when Testifire is positioned over a detector and * Depending on model specification ** Future option remote controls are not generally required. Certain detectors (such as those with virtual... - Page 7 As our policy is one of continuous improvement, details of products described within this publication are subject to change without notice. All information provided here is believed to be correct at the time of going to press. Every effort has been made to ensure the accuracy of information which is provided in good faith but nothing detectortesters contained herein is intended to incorporate any representation or...
Need help?
Do you have a question about the 25 and is the answer not in the manual?
Questions and answers