Product And Component Identification; Machine - jcb JS200 Operator's Manual

Product and Component Identification

Machine

Your machine has an identification plate. The PIN (Product Identification Number), weight, engine power, year
of manufacture and serial number of the machine are shown on the identification plate.
The machine serial number is also inscribed at the baseplate of the rear frame.
A Identification plate (location)
The machine model and build specification are indicated by the PIN. The PIN has 17 digits and must be read
from left to right.
JCB
Digit
1 to 3
4 to 8
9
10 to 17
A Identification plate
8
Figure 4.
B
A
Table 1. Typical PIN
8085
Table 2. Explanation of the PIN
Description
World manufacturer identification. For example, JCB = UK Build.
Machine type and model. For example, 8025 = 8025.
Random check letter. The check letter is used to verify the authenticity of a
machine's PIN.
Machine serial number.
Figure 5.
A
9821/3250-5
Product and Component Identification
B Serial number (inscribed)
L
About the Product
01536000
8