Checking The Mounting Workbench; Tools - Ruijie Reyee RG-EW3000GX PRO Hardware Installation And Reference Manual

Hardware Installation and Reference Guide

Keep the device away from the grounding facility or lightning and grounding facility of the power device as
much as possible.

Keep the device far away from high-frequency current devices such as high-power radio transmitting stations
and radar launchers.
2.2.5

Checking the Mounting Workbench

Regardless of whether the device is installed on a desktop or wall, the following conditions must be met:

The desktop or wall surface must be smooth and clean.

The network cables must be in good condition.
2.3

Tools

Common
Tools
Special
Tools
Meters
Note
The RG-EW3000GX PRO router is not shipped with a tool kit. You need to prepare a tool kit by yourself.
Phillips screwdriver, cables, fastening bolts, diagonal plier, cable ties,
Wire stripper, crimping plier, RJ45 crimping plier, and wire cutter.
Multimeter and bit error rate tester (BERT)
9
Preparing for Installation