Matica XID-M300 Quick Start Manual

XID-M300
1.

Opening the printer box

1. Remove all 4 plastic
locking clips at base
2. Carefully slide box upwards
3. Remove accessories box
4. Remove foam packing
from printer and lift printer
onto desk location
5. Remove plastic protective
films
6. Retain and store all packing
materials for future use.
Any warranty returns
should be sent in original
packaging
4.
Visit:
www.maticagroup.com/install
Or scan the QR code below using
your computer's webcam to the
installation page and follow the
online instructions.
XID-M300 QSG A4 ENG V5
Quick Start Guide
2.

Contents check list

1. XID-M printer
2. Power cord
3. USB cable
4. Output hopper
5. Cleaning card
6. Cleaning swab
Please make sure that all
the components and
accessories are included in
the box. If there are missing
or damaged items, please
contact your dealer for
assistance.
5.

Download and install driver

• Follow the online step-by-step guide to
download and install the printer driver.
2
1
4 5
CLEANING
CARD
Connect USB cable
• Connect the printer to the computer using the USB cable
when instructed during driver installation.
maticagroup.com
3.

Power your printer

3
• Connect the power cord
6
• Power ON the printer
6.

Register your printer:

www.maticagroup.com/register
• Validate your warranty.
• Receive notifications of driver and
firmware updates.
• Gain easy access to support.
Register: via mobile
• Scan the QR code to the registration
page and follow the online instructions.