Using Car Charging Cable; Operation; Using The Power Station; Using The Wireless Charging Pad - Champion 201188 Operator's Manual

201188 - 300 PORTAbLE POwER STATiON

Using Car Charging Cable

1. Open the Input Cover.
2. Plug the car charging cable into the input port.
3. Connect the other end into a regulated 12V outlet.

OPERATiON

Using the Power Station

1. Press and hold the power button for three seconds, until
display illuminates.
2. Press the appropriate button to turn on power for ports/
outputs intended to be used.
See Specifications section for maximum allowable watts. The
sum of the watts of the 12V DC outlet, wireless charging pad,
and USB ports can not exceed the number listed next to "DC
Watts". The 120V AC outlet(s) can not exceed the number
listed next to "AC Running Watts" and "AC Starting Watts".
All ports and outlets may be used simultaneously and each
have their own wattage limits and protections.
To protect sensitive electronics, as the Power Station's battery
level drops to 5%, the AC output will be shutoff and fault
indicator code E85 will be shown. DC and 12VDC ports can
still be used. AC output will be restored once the power station
is recharged.
3. Plug in desired devices.

Using the wireless Charging Pad

1. Press the USB button.
2. Place the device in the center of the charging pad. If the
device is not centered on the pad, the device may not charge
or charge slowly.
Ensure your device is compatible with wireless charging.
Remove phone case for more efficient charging.
20
OPERATiON
NOTiCE

NOTiCE

NOTiCE
