Milwaukee 18 volt sawzall operator's manual (18 pages)
Summary of Contents for Milwaukee M18 FUEL 2737-20
Page 1
OPERATOR'S MANUAL Cat. No. / No de cat. 2737-20, 2737B-20 M18 FUEL™ JIG SAWS WARNING To reduce the risk of injury, user must read and understand operator's manual.
GENERAL POWER TOOL • at all times. This enables better control of the power SAFETY WARNINGS Read all safety warnings, instruc- WARNING • Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from tions provided with this power tool. Failure to follow moving parts.
It is not possible to anticipate every Do not use this tool if you do not understand these operating instructions or you feel the work is beyond your capability; contact Milwaukee Tool or a trained Blade Transparent blade lever •...
Page 4
Installing the LED Cover ASSEMBLY The LED cover is used to shield the LED when the Recharge only with the charger WARNING Removing/Inserting the Battery To remove the battery, push in the release buttons WARNING changing or removing accessories. To insert the battery, slide the pack into the body Adjusting the Shoe WARNING recommended for this tool.
Selecting Speed Use lower speeds for materials such as plastics and start the tool, push the slide switch forward Use higher speeds for materials such as wood and vary stop the tool, press the slide switch and re- To vary the speed, increase or decrease pressure before removing the blade from a partial cut or The further the trigger is pulled, the NOTE: If the switch is held on for more than 3 sec-...
Bevel cuts Cutting Sheet Metal — sheet metal may vibrate months to one year, depending on use, return the tool, battery pack and charger to a MILWAUKEE To reduce the risk of explosion, WARNING electric shock and property dam-...