Error Codes; Before You Call For Service - Haier HLC1700AXW User Manual

Combination front-load washer and ventiess dryer
Hide thumbs Also See for HLC1700AXW:
Table of Contents

Advertisement

Available languages

Available languages

TROUBLE
POSSIBLE CAUSE
POSSIBLE REMEDY
Door will not open
after completion of
a dry cycle
(Door lock is activated)
The temperature inside has not
cooled down to a safe temperature.
Wait for the inside temperature
to cool down. The cooling time
can take several minutes.
ERROR CODES
ERROR
CODE
SYMPTOM
ACTION TO
TAKE
SOLUTION
El
The washer cannot drain
the water within 4 minutes.
Stop running
Clear the pump.
Service Needed.
E2
Cannot lock the door after
20s.
Stop running
Service Needed.
E4
After 8 minutes, the
selected water level has
not been reached.
Stop running
Check plumbing and
water hose connections.
Service Needed
F7
Motor circuit error
Stop running
Service Needed
E8
The water is above the
warning level.
Stop running
Service Needed
F9
Dryer sensor circuit
problem.
Stop running
Service Needed
FA
Water level sensor circuit
problem.
Stop running
Service Needed
FC
No feedback signal from driver
unit.
Stop running
Service Needed
Fd
The dryer heating is abnormal.
Stop running
Service Needed
FE
The dryer motor is abnormal.
Stop running
Service Needed
Unb
Unbalanced load
Spin low speed
and cancel
drying
Evenly distribute clothing
in the wash basket.
BEFORE YOU CALL FOR SERVICE
IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT A QUALIFIED SERVICE
TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE UNIT YOURSELF.
31

Advertisement

Table of Contents
loading

Table of Contents