Haier HLC1700AXW User Manual page 18

POWER ON/OFF BUTTON ®
Press once to turn the washer / dryer ON. Press again to turn the washer / dryer OFF.
If the washer / dryer is left on for more than 2 minutes without any buttons
being touched, the power automatically turns off.
START/PAUSE BUTTON ►
ii
Press this button to start a cycle. Once started, only the selected cycle and
settings will be displayed on the LED screen. Pressing the button a second time
will pause the operating cycle and the time display will blink. During a pause,
settings and options can be modified and selected, however the original cycle
cannot be changed. If you don not press the Start/Pause button to start
a cycle again, the operating cycle and the time display will blink all the time.
Pressing the button again will resume the active cycle. If the' Drying Level' option
has been selected, the washer will automatically begin drying after completing
a wash cycle.
NOTE. An operating cycle can be cancelled at any time by pressing Power
ON/OFF button.
CYCLE SELECTOR
The knob can be turned in either direction to choose a wash or dry cycle.
The selected cycle will blink on the LED screen. Each cycle has preset water
temperature,soil level,spin speed,dry level ,and options.In certain
cycles the setting can be manually programmed to suit your needs.
WASH TEMP BUTTON
Use this button to select wash/rinse water temperatures. Available selections vary
for each cycle. The desired setting will blink during the selection process.
SPIN SPEED BUTTON
Use this button to select a spin speed. Available selections vary for each cycle. The
desired setting will blink during the selection process.
SOIL LEVEL BUTTON
Soil level (wash time) is preset for each cycle.As you press this button,the cycle time
will increase or decrease in the Time Remaining display.
NOTE. Lower soil level settings will help reduce tangling and wrinkling.
DRYLEVEL BUTTON
Use this button to select a dry level. Available selections vary for each cycle. The
desired setting will blink during the selection process.
16