Operation - TMC Kreisel Instructions Manual

Operation

Once the Kreisel tank is full of water, plug in the power supply unit and switch on.
Once switched on, water will be drawn into the filtration chamber via the water inlet (0) and will
pass through the multi-stage filtration (3) and will return back into the tank via the water outlet
spray bar (2).
CAUTION: To avoid any operating problems, always ensure that the water inlet (0), water outlet
spray bar (2), outlet tubing and water circulation pump (4) are always clean and free of blockages.
2
2
5
5
0 0
3
3
4
4
Using a chiller
The Kreisel tank has INLET/OUTLET connectors (5) on the back of the tank allowing connection to
an external chiller (not included). To connect an external chiller to the Kreisel tank, please follow
the diagram below.
CONNECTION CONNECTION WITH
WITHOUT CHILLER CHILLER
5
2
2
5
4 4
PLEASE NOTE: An additional pump and connection fittings may be required (depending on the
individual installation requirements of your chosen external chiller and its proximity to the Kreisel).
19