Safety Notes - Chauvet DJ Cumulus HP Quick Reference Manual

EN

Safety Notes

These Safety Notes include important information about installation, use, and maintenance of Cumulus HP.
■ ALWAYS:
♦ Connect to a grounded circuit.
♦ Connect to operating voltages as specified on the product's spec sticker.
♦ Disconnect from its power source during periods of inactivity.
♦ Heed all restrictions and warnings on the spec sticker.
♦ Mount in a location with at least 20 in (50 cm) of ventilation.
♦ Use Chauvet fluids.
♦ Drain the tank before transporting or storing the product.
♦ Keep the machine level.
♦ Clean the machine after every use.
♦ Clean around the product during and after use, as surfaces may become slippery.
♦ Close both valves prior to filling with fluids.
■ In the event of a serious operating problem, stop using immediately.
■ All fog/haze machines may set off smoke detectors.
■ DO NOT:
♦ Open this product or attempt any repairs. It contains no user-serviceable parts.
♦ Use if the power cord is crimped or damaged.
♦ Disconnect by pulling on the power cord.
♦ Allow flammable materials close to the product when it is operating.
♦ Touch the housing when it is on.
♦ Block any ventilation holes/slots in the housing.
♦ Carry the product by its power cord.
♦ Operate in temperatures higher than 104°F (40°C).
♦ Expose to environments that exceed the Ingress Protection (IP) rating.
♦ Expose to rain or moisture.
♦ Use outdoors.
♦ Submerge.
♦ Leave outdoors for extended periods of time.
♦ Expose to corrosive environmental conditions such as temperature, humidity, salinity, pressure, radiation,
or shock.
♦ Set this product on a flammable surface.
♦ Touch the output nozzle. It may be hot for several hours after use.
♦ Drink the fluid.
♦ Add perfume, alcohol, gasoline or any other chemical to the fluid.
♦ Use for space-heating purposes.
♦ Leave machine unattended.
♦ Overfill.
What is Included
♦ Cumulus HP
♦ Hose
♦ Output nozzle
Control Panel Description
Button Function
<MENU> Exits from the current menu or function
<UP> / <UP> navigates upwards through the menu list and increases the numeric value when in a
<TIMER> function. <TIMER> starts the timer-controlled operation.
<DOWN> navigates downwards through the menu list and decreases the numeric value when in a
<DOWN> /
function.
<VOLUME>
<VOLUME> triggers the pump to modify the output volume.
<ENTER> enables the currently displayed menu or sets the currently selected value into the selected
<ENTER> /
function.
<STOP>
<STOP> turns the fog output off.
1
QUICK REFERENCE GUIDE
♦ Wireless remote
♦ Quick Reference Guide
Cumulus HP QRG Rev. 1